.
Resilient Flooring 09650
Section 09650
PART 1. GENERAL
1.XX QUALITY ASSURANCE
A. Standards: Meet requirements of Resilient Floor Covering Institute.
B. Moisture Tests: Owner will employ services of an Independent Testing Laboratory (ITL) for testing the moisture content of concrete slabs in accordance with requirements of ASTM F l869-98, Standard Test Method for Measuring Moisture Vapor Emission Rate of Concrete Subfloor using Anhydrous Calcium Chloride.
1.XX PROJECT/SITE CONDITIONS
A. Environmental Requirements: Maintain room temperature and humidity levels before, during and after installation as required by flooring manufacturer.
PART 3. EXECUTION
3.XX EXAMINATION
A. Verify that concrete slab over vapor barrier meets moisture tests.
B. Verify that finish floor tolerances meet requirements shown in Section 03300 Concrete.
C. Do not proceed with installation until verifications indicate requirements are met.
D. Notify Architect if verifications indicated non-compliance with Contract Documents.
| ASTM P. O. Box C700 West Conshohocken, PA 19428 www.astm.org |
Carpet & Rug Institute 310 Holiday Ave. Dalton, GA 30720 www.carpet-rug.com |
 |
|
|
Resilient Floor Covering Institute |
For an Acrobat Reader version of the Sample Specifications click here.
By entering into any of the pages of this Web site I accept the conditions of the sites disclaimer.
Home Page | Membership Roster | Background Information | Quality Control
Concrete Formwork Specs | Cast-in-Place Concrete Specs
Resilient Flooring Specs | Carpet Specs | Job Conditions
Disclaimer | Contact Us
Floor Covering Industry Fund
10117 SE Sunnyside Rd.-F #1225
Clackamas, OR 97015
503-760-5109
FX: 503-762-2977
E-mail: info@sigfloor.org
Site Design & Hosting by PCA Web Design & Hosting
For more information contact us at: info@pcawebdesign.com
© Copyright 2001-2003